CFRT Tape equipment Production Line of Continuous Fiber Reinforced Thermoplastic Composite Unidirectional Tape
In short, what we could provide:
(Click on the name below to reach the corresponding product link)
Product Description
Using extrusion melt impregnation process produce for PP PE PA + continuous glass fiber reinforced thermoplastic unidirectional tape production line
1. The inner width of the mold door width is 1300mm, and the guaranteed width of the finished product door width is 1250mm.
2. The thickness of the acceptance sheet is 0.3mm±0.02mm, the adjustable range of PP belt thickness is 0.26-0.4mm, and the flexible range of glass fiber content is 50%-65%.
3. The production speed is 8-12m/min, and the design maximum speed is 12m/min.
4. Appearance requirements for acceptance sheet:
The surface of the strip is flat and smooth, the glass fiber is evenly distributed, no glass fiber is exposed, and the thickness is uniform;
The glass fiber is completely covered by resin impregnation without dry yarn.
Machine list
| Item |
Machine list(only show parts of the whole line) |
| 1 Creel Unit |
Fiberglass Creel, Yarn bobbins. |
| 2 Traction Unit |
rubber rolls, mirror grinding rolls, cylinders, and geared motors. |
| 3 Extruder and Dipping Unit |
Single Screw Extruder, main motor |
| 4 Mold |
One set of extrusion mold and one set of the impregnation mold |
| 5 Laminator Unit |
mirror roller, servo motor, cylinder, oil station, double modulus water temperature machine, Industrial chiller |
| 6 Flattening Unit |
rubber rolls, cylinders, geared motor, Waste edge winder, and Motor trimming device. |
| 7 Winding Unit |
single station finished winding machine, gas expansion shaft, |
| 8 Electric Control system |
electrical control cabinet, touching screen, and the control panel in the screen is displayed in English. |
Product Parameters
The general technical data will include:
1: The Max. valid width of CFRT tape:
2:CFRT Tape thickness
3:The maximum speed of the whole production line can reach:
4:The total power of the cfrt production line
....
After Sales Service
1. Equipment Warranty: Calculated from the day the equipment is delivered to the customer's factory for installation, the warranty period is one year.
2. Equipment installation: If the on-site installation is required, the buyer is responsible for all round-trip expenses for commissioning personnel and all expenses incurred during the installation process; the buyer must fully cooperate, including relevant water, electricity, gas requirements, and related tools.
3. The supplier will provide preferential spare parts supply after the warranty period.
4. During the warranty period, the supplier is responsible for free replacement of the normal damage of non-wearing parts (non-human or improper operation).
5. The supplier provides long-term technical consulting services.
Recommend Products
Thermoplastic ud tapes
UD Tape is a kind of sheet material formed of parallel continuous fiber and PP resin by impregnation technique.
Advantage:
1:High specific strength and stiffness
2:Good shock resistance
3:No VOC/formaldehyde emission, recyclable.
4:Flexibile design according to the requirements of use, short product development cycle.
5:Suitable for a variety of processing and manufacturing processes.
Application:
thermoplastic reinforced composite pipe, automotive parts safety protection, wrapping cylinder leisure, etc
Sandwich Panel
Product advantages:
The product has lightweight, has superior low-temperature resistance, high strength, flexible and changeable design, wide range of applications, and is recycled by the environmental protection department.
Application fields:
1. Car transport compartment: This product can perfectly replace the original glass steel plate for the compartment below 6.8 meters. A 4.2-meter carriage is equipped with aluminum profiles, and the weight of a single carriage is only 380kg.
2. Architectural decoration: the surface of the board can be used as a variety of surface films, which is highly decorative. It can be used for decorative partitions, ceilings, and bathroom partitions. It can also be used for decorative background walls through reprocessing and composited with marble materials. Compared with traditional marble background walls It can greatly reduce the amount of stone used, has good light transmission performance, and improves the decorative effect.
3. Make all kinds of mobile houses, storage boxes, and RVs: it has the load-bearing and compressive effects of a metal box, and it weighs a quarter of the weight, which is convenient for handling and transportation.
Warehousing and logistics industry: Honeycomb panels can be used to make storage shelf partitions, which are lighter in weight than traditional wood boards, moisture-proof, lighter than metal partitions, and corrosion-resistant. For high-rise storage shelves, the use of honeycomb panels for higher load-bearing capacity can reduce the self-weight of the shelves, reduce storage safety risks, and improve cargo transfer and storage speed.
Product advantages: The product is composed of superimposed glass fiber tapes, which have high strength and low specific gravity, and can be heated and reshaped many times. The density is 1.5, which is one-fifth of steel and has the advantages of non-absorbent, corrosion resistance, etc., and the temperature resistance is between -40°~120°.
Application fields:
1. Automotive field: Used for inner and outer panels of refrigerated vehicles, logistics transport vehicle panels, and honeycomb panel skins. After multi-layer compounding and heating, they are pressed and formed by molds and pressed into automotive front-end modules, automotive interior parts, etc.
2. Sports equipment: The surface of scooters is enhanced, and paddles, sleds, etc. have been used in batches.
3. Labor insurance products: Through the molding process, after heating, they can be molded into safety shoe toes, safety helmets, and soles of high-end sports shoes and casual shoes.
4. Flame-retardant panels: used for molded products such as high-speed rail guards, auto parts, building formwork, home furnishing, etc., where flame-retardant requirements are required.
Thermal Insulation Panel
Product advantages:
The product is light in weight (according to a 4.2-meter refrigerated truck, it can reduce the weight by about 200kg compared with the traditional FRP carriage) and has excellent low-temperature resistance, and is environmentally friendly and non-toxic. It meets the EU food safety certification standards and can be directly in contact with food. The core material can use PU, XPS, PET, PVC, etc.
Application fields:
It is mainly used in refrigerated trucks, cold storage, refrigerated containers, RVs, and mobile buildings, and can also be used in building anti-seismic walls.
Finally, here is a panorama of our factory.
Audited Supplier 
){kind=link}
){kind=link}